Call Us Now +86 15989854145 / +86 15917874817|Leemandisplay@hotmail.com

NOVASTAR MCTRL300 LED Sending Box Controller MCTRL600 Specifications

Home|NovaStar LED Control Card|NOVASTAR MCTRL300 LED Sending Box Controller MCTRL600 Specifications

NOVASTAR MCTRL300 LED Sending Box Controller MCTRL600 Specifications

NOVASTAR MCTRL300 LED Sending Box Controller MCTRL600
NovaStar MCRTL4K / MCTRLR5 / MCTRL1600 / MCTRL660 PRO / MCTRL660 / MCTRL600 / MCTRL300 / MCTRL700 4K LED Sender Box
NovaStar Multi-picture splicer VS0 /VS1 / VS2 / VS3 / VS5 / VS7

Description

NOVASTAR MCTRL300 LED Sending Box Controller MCTRL600 Specifications, NovaStat MCTRL660 PRO Video Controller, Novastar MCTRL600 Sending Box Synchronous LED Display Controller. Novastar Mctrl Series Mctrl660 PRO/660/600 LED Sending Box LED Display Controller Card.

NovaStar MCTRL600 LED Sending Box Features:
1 × DVI input
1 × HDMI 1.3 input
1 × audio input
1 × light sensor connector
Supports resolutions up to 1920×1200@60Hz and downward compatibility.
4 ×RJ45Gigabit Ethernet outputs, each up to 650,000 pixels.
1 × type-B USB control port.
UART IN and UART OUT control ports for device cascading.
Supports the new generation of NovaStar calibration technology, which is fast and efficient.
Supports a variety of video formats.

NovaStar Mctrl Series MCTRL660 Controller LED Sending Box Features:
1 × DVI input
1 × HDMI input
4 × Gigabit Ethernet outputs
Supports the new generation of NovaStar calibration technology, which is fast and efficient.
Supports resolutions up to 1920×1200@60Hz and downward compatibility.
Multiple controllers can be cascaded.
Supports 18-bit grayscale processing and display.
Manual screen brightness adjustment, which is fast and convenient.
Quick screen configuration without using a computer.
Adopts an innovative architecture to implement smart screen configuration, allowing a screen to be configured within 30 seconds and greatly shortening the stage preparation time.
Adopts NovaStar G4 engine to realize a perfect display image with no flickering or scanning lines, as well as fine quality and good sense of depth.
Supports a variety of video formats, as described in Figure 2-1

NovaStar MCTRL660 PRO LED Sending Box Features:
Input connectors: 1 × 3G-SDI, 1 × HDMI 1.4a, 1 × single-link DVI
Output connectors: 6 × Gigabit Ethernet port, 2 × 10G optical port
Loop output connectors: 1 × 3G-SDI LOOP, 1 × HDMI 1.4a LOOP, 1 × DVI LOOP

The Mctrl Series MCTRL660 PRO has many industry-leading advanced technologies:
Input of ultra-high color depths: 10-bit/12-bit RGB 4:4:4/YCbCr 4:4:4, with input resolutions up to 1920×1080@60Hz, increasing color expression capabilities by 4096 times compared to 8-bit inputs, and presenting images with rich and delicate colors, smoother transitions, as well as clearer details.
Supports individual Gamma adjustment for RGB when the color depth of input source is 10-bit or 12-bit, which effectively controls image non-uniformity under low grayscale and white balance offset to improve image quality.
Low latency: Less than 1 ms (when the start position of image is 0).
Dual working modes: working as sending card and fiber converter.
One-click backup and recovery, quickly recovering previous screen configurations to deal with sudden on-site failure.
Image mirroring, allowing for more cool and dazzling stage effects.
Auto LED screen configuration.
Web control.
Pixel level brightness and chroma calibration.
Monitoring of inputs.
Multiple MCTRL660 PRO units can be cascaded.

NovaStar MCTRL700 LED Sending Control Box Features:
3 × Input connectors
1×SL-DVI (IN-OUT)
1×HDMI 1.3 (IN-OUT)
1×AUDIO
6×Gigabit Ethernet outputs
1×Type-B USB control port
2×UART control ports
Used for device cascading. Up to 20 devices can be cascaded.
Pixel level brightness and chroma calibration.
Working with NovaLCT and NovaCLB, the controller supports brightness and chroma calibration on each LED, which can effectively remove color discrepancies and greatly improve LED display brightness and chroma consistency, allowing for better image quality.

NovaStar MCTRL300 LED Display Controller Box Features:
1 × DVI input
1 × audio input
1 × type-B USB control port
UART control ports to cascade devices for uniform control.
Dual Ethernet outputs.
Supports the new generation of NovaStar calibration technology, which is fast and efficient.
1 × light sensor connector.
Supports resolutions up to 2048×668@60Hz and downward compatibility.
Supports a variety of video formats.

NovaStar MCTRL4K LED Sending Box advanced technologies:
Supports HDR function, both in HDR10 and HLG standards, which can greatly enhance the image quality of the display, presenting more clear and vivid
Supports individual Gamma adjustment for RGB when the bit depth of input source is 10-bit or 12-bit, which effectively controls image non-uniformity under low grayscale and white balance offset to improve image
Low latency: Less than 1 ms (when the start position of image is )
Supports 3D function when working with the 3D emitter EMT200 and 3D glasses, allowing you to experience 3D display
In multi-card mode, the MCTRL4K can be used as two controllers, allowing the images of two input sources to be displayed on the screen at the same
The MCTRL4K is stable, reliable and powerful, dedicated to providing a best visual experience. It can be mainly used for the fixed and rental applications, such as concerts, live events, security monitoring, Olympic Games and various sports centers.

NovaStar MCTRL R5 LED Sending Box advanced technologies:
Inputs:
1 × 6G-SDI
1 × dual link D-DVI
1 × HDMI 1.4
Pixel capacity of each up to 4,140,000 pixels.
Outputs:
8 × Gigabit Ethernet
2 × fiber optic outputs.
Display rotation at any angle.
Innovative architecture to enable smart configuration and shorter stage preparation time.
NovaStar G4 engine to enable a stable and smooth display with good sense of depth and no flickering or scanning lines.
Supports the new generation of NovaStar pixel level calibration technology, which is fast and efficient.
Supports quick and easy manual adjustment of screen brightness.
Supports firmware update via USB port on the front panel.
Multiple controllers can be cascaded for uniform control.

Novastar MCTRL 1600 MCTRLR5 MCTRL 4K LED Display, Novastar LED Sending Box MCTRL Series MCTRL700 Small Pitch LED Screen Novastar Controller Box.

NovaStar LED Controller Card System Synchronous and asynchronous
NovaStar Taurus Series LED Display Controller TB1 / TB2 / TB3 / TB4 / TB6 / TB8 / TB10 LED Multimedia Player
NovaStar LED Sending Card MSD300 / MSD600
NovaStar LED Receiver Card MRV366 / MRV336 / MRV328 / MRV216 / MRV210 / MRV208 / MRV300-1
NovaStar LED Receiver Card DH418 / DH426 / DH7512 / DH436 / DH7516 / AT20 / AT30
NovaStar A10s/ Plus / A9s / A8s / A8 / A7s / A7 / A5 / A5s / A4s LED Receiving Card of Armor Series
NovaStar MCRTL4K / MCTRLR5 / MCTRL1600 / MCTRL660 PRO / MCTRL660 / MCTRL600 / MCTRL300 / MCTRL700 4K LED Sender Box
NovaStar V1260 / V1060 / V960 / V900 / V760 / V700 LED Video Processor
NovaStar Multi-picture splicer VS0 /VS1 / VS2 / VS3 / VS5 / VS7
NovaStar NovaPro UHD / NovaPro HD / VX6s / VX4S-N / VX4U / VX400s VX2U All-In-One Series LED Video Processor Controller
NovaStar Accessories Multifunction Card MFN300 / MFB300-B / Monitoring Card MON300 / Ambient Brightness Sensor NS060 / Fiber Converter CVT310 / CVT320 / Ambient Temperature Sensor MTH310 / Splitter DIS-300 / Fiber Converter CVT4K-S / Fiber converter CVT-Rack
NovaStar Software SmartLCT Mac
NovaStar Software VPlayer User Manual
NovaStar Software NovaLCT LED Configuration Tool User Manual
NovaStar Software ViPlex Express
NovaStar Software Async Mode User Manual
NovaStar Software Studio Mode User Manual

16K Multi Window LED Video Splicer 4K Multi Window LED Video Splicer

Go to Top